| Name | Flat Nose K-Wire Pliers |
| Lead Time | 0-3 days |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | MEDIZINISCH IMPEX |
| Sterility | Non-Sterile |
| Usage | Reusable |
Flat Nose K-Wire Pliers
serrated jaws, 7″ (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Description
Reviews (0)
Shipping & Delivery
Related products
Boehler Wire & Pin Extractor
Boehler Wire & Pin Extractor can be used in a variety of procedures to manipulate surgical pins and wire. Many orthopedic procedures such as repair of fractures or insertion of support after laminectomy procedures require the use of wire or pin. These added support confer additional stability to the bone and increase the speed of healing while reducing the damage done by trauma. This particular instrument can be used to insert, remove and reshape wires and pins as they are needed. This instrument is available in three different sizes to satisfy a variety of patient needs and surgeon preferences.
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Loute Wire Tightener
8-1/2" (22.0 cm) Loute Wire Tightener is ideally suited for use in procedures that require the addition of wire and subsequent tightening of these wires. This instrument can be used to twist and tighten the ends of loose wire without putting undue pressure or strain on these regions which can make them more liable for breakage. It can be used in many procedures specifically those such as fracture approximation in which a minimal amount of foreign material is implanted but the optimal support is obtained to accelerate healing.
Cable Cutter – Tungsten Carbide
tungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm) Cable Cutter is an instrument ideally suited for use in orthopedic procedures. A number of surgical interventions require the placement of steel wires or cable to confer additionally stability to an area of bone. Specifically cable can be used in total hip arthroplasty to give more secure fixation and prevent trauma during the healing process. After inserting the cable it needs to be trimmed and manipulated to be the perfect length for that unique patients scenario. Additionally this instrument features tungsten carbide jaws and has a maximum capacity of 2.0 mm.
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Flat Nose Pliers – Slender Jaws
slender jaws, 2.0 mm tip, 6" (15.2 cm) Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
K-Wire Side Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Reviews
There are no reviews yet.